URETHANE CEMENTS
#1030-TP THERMALCRETE TOP COAT
URETHANE TOP COAT FOR THERMALCRETE SYSTEMS – WITH AGGREGATE
Thermal-Crete TR #1030 is a trowel applied (3) three- component, cementitious polyurethane cement flooring system for medium to heavy-duty use for interior applications. Thermal-Crete TR #1030 has a similar coefficient of expansion similar to concrete allowing this flooring system to tolerate large temperature swings (thermal-shock) and service exposures to wet and dry temperatures up to 260 degrees F.
PACKAGING & COLORS
Kit is pre-measured 1 gallon each of both parts A & B, along with part C which is (2) 64 lb. bags of A112 Crete Slurry #9A.Slurry Sand.
ADVANTAGES
- High compressive strength
- Excellent resistance to thermal shock
- Very rapid cure formulation resulting in minimal downtime
- Tolerates higher than normal moisture vapor transmission rates (MVTR)
- Can be applied to freshly poured concrete after a minimum of 7 days
- Extremely durable
- Low odor during application & cure-can be applied in occupied facilities, USDA accepted
- VOC compliant with ALL U.S. regulations
- Can be factory or field pigmented using Thermal-Chem’s Universal Pigment
USES / APPLICATIONS
DATA SHEET
LIMITATIONS
- Can be applied in ambient temperatures as low as 50 Degrees-F
- Do not apply when project humidity is greater than 70%
- Do not thin this product
- Consider top coating Thermal-Crete if applied in areas with higher than normal UV exposure
APPLICATION INFO
#1030 TP Urethane Topcoat
Mix one gallon of Part A and one part of part B and 12 lbs. of Part C (Product A113 Crete Top Coat #10 aggregate. Apply with a flat squeegee, this will yield approximately 190-200 sq. ft. per kit. Aluminum oxide can be broadcast into the #1030 TP Urethane Topcoat and back rolled if a higher degree of non-skid is needed.
Expected Coverage: 46 square feet at 1⁄4”
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.