URETHANE CEMENTS
#1030-SL THERMALCRETE SLURRY
SELF-LEVELING URETHANE CEMENT SLURRY
Thermal-Crete SL #1030 is a self-leveling (3) three component, cementitious polyurethane slurry for medium to heavy duty use for interior applications. Thermal-Crete SL #1030 has a similar coefficient of expansion similar to concrete allowing this flooring system to tolerate large temperature swings (thermal-shock) and service exposures to wet and dry temperatures up to 260 Degrees F.
PACKAGING & COLORS
Kit is pre-measured 1 gallon each of both part A & B, along with part C which is a 54 lb. bag of #A111 Crete Slurry Sand.
ADVANTAGES
- High compressive strength
- Excellent resistance to thermal shock
- Very rapid cure formulation resulting in minimal downtime
- Tolerates higher than normal moisture vapor transmission rates (MVTR)
- Can be applied to freshly poured concrete after a minimum of 7 days
- Extremely durable
- Low odor during application & cure – can be applied in occupied facilities, USDA accepted
- VOC compliant with ALL U.S. regulations
- Can be factory or field pigmented using Thermal-Chem’s Universal Pigment
USES / APPLICATIONS
-
Our urethane cement system designed for commercial kitchens and areas that require a high-build with a quick cure for faster project turnaround.
DATA SHEET
LIMITATIONS
- Can be applied in ambient temperatures as low as 50 Degrees-F
- Do not apply when project humidity is greater than 70%
- Do not thin this product
- Consider top coating Thermal-Crete if applied in areas with higher than normal UV exposure
APPLICATION INFO
Slowly pre-mix (1) one gallon of Part A, then add (1) gallon
of Part B. If using pigment/colorant add to the Part B and drill for one minute at low r.p.m. Then add 54 lbs. of Part C aggregate and drill for an additional 3 minutes, until all three components are thoroughly mixed. (Note: Each part is pre- measured and partial mixes should not be used)
Apply using a gauge rake or screed pre-set for desired thickness. A spiked roller can be used to help level mixture and aid in the release of air entrapment. Broadcast TCA 108 silica sand to rejection.
Once properly cured, remove excess silica sand. Additional top coats may be applied at this time.
Expected Coverage: 40 square feet at 3/16”, 30 square feet at 1⁄4”.
SURFACE PREPARATION – Apply ThermalCrete #1030 only to clean and sound substrates. Mechanical preparation by means of shot- blasting or diamond grinding to an ICRI CSP 3/4 is recommended (see ICRI Guideline No. 03732 for additional details).
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.