RESURFACERS & TOPCOATS
#746 DECOCOLOR
PIGMENTED TOP COAT 100% SOLIDS
DECOCOLOR is two component 100% solids pigmented epoxy specifically formulated to be a base and/or intermediate coat(s). Due to this proprietary formulation utilizing a cycloaliphatic curing agent, DECOCOLOR provides an extremely durable wear surface. This product is available in both Thermal-Chem standard and designer series colors.
DECOCOLOR #746 has been designed for interior use only.
PACKAGING & COLORS
Kit sizes available are 1, 3, 15 gallons
ADVANTAGES
- Superior surface protection
- Available in both normal and rapid cure formulations
- VOC compliant with ALL U.S. regulations-Safe to use in occupied facilities
- USDA approved
- Cost effective durable and sanitary flooring solution
- Good abrasion resistance
- Can be field pigmented
USES / APPLICATIONS
-
An economical top coat
-
Uses a cycloaliphatic base that provides high abrasion resistant
DATA SHEET
LIMITATIONS
- Do not apply to substrates below 55 degrees F
- Consider a urethane top coat to increase UV stability
- Check Thermal-Chem Chemical Resistance Guidelines if area(s) are to be exposed to harsh chemicals
- Do not thin this product
APPLICATION INFO
Pre-drill both components for 2-3 minutes to ensure pigment is evenly dispersed throughout mix. Combine both components and drill for an additional 3 minutes.
Apply #746 DECOCOLOR with a squeegee, brush, or high quality non-shed roller. Only mix the amount of product that can be properly applied within 20-40 minutes.
SURFACE PREPARATION – Apply #746 DECOCOLOR only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.