RESURFACERS & TOPCOATS
#731 ARMORBOND
INDUSTRIAL PIGMENTED TOP COAT 100% SOLIDS
ArmorBond #731 is two-component 100% solids, pigmented, epoxy polymer top coat. This product can be used to level and restore deteriorated, irregular, or pitted concrete surfaces.
When used as a top coat ArmorBond #731 provides a smooth, glass-like or textured finish that has excellent abrasion and impact resistance.
ArmorBond #731 has been designed for interior use only.
PACKAGING & COLORS
Kit sizes available are 1, 3, 15 gallons
ADVANTAGES
- Self-priming
- Can be used as both a base coat and top coat
- Moderate resistance to common industrial chemicals and UV exposure
- Easy 2 to 1 mix ratio (by volume)
- Low odor during application & cure – can be applied in occupied facilities
- VOC compliant with ALL U.S. regulations
- Available in ten (10) standard colors – can be factory or field pigmented
USES / APPLICATIONS
-
Pigmented top coat
-
100% solids, no offensive smell
-
A nice self-leveling epoxy
DATA SHEET
LIMITATIONS
- Do not apply in ambient temperatures below 55 Degrees-F
- Do not apply at less than 8 mils or 200 square feet per gallon
- Do not thin this product with any solvent
APPLICATION INFO
Apply ArmorBond #731 with a squeegee, brush, or high quality non-shed roller. Only mix the amount of product that can be properly applied within 15-25 minutes. Once thoroughly mixed this product should be placed on the surface and NOT LEFT IN THE MIXING BUCKET.
SURFACE PREPARATION –Apply ArmorBond #731 only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.