PRIMERS AND BASE COATS
#726 ARMORPRIME
GENERAL PURPOSE 100% SOLIDS EPOXY PRIMER
A straw/clear 100% solids two component epoxy specifically formulated to be used as both a primer and/ or a base coat. Due to the low viscosity of this product,
it is an ideal choice to adhere to concrete creating a tenacious bond. This product can be applied as a “neat” coat, or can be mixed with aggregates such as fine mixed silica to aid in filling in rough or uneven substrates.
ArmorPrime #726 has been designed for interior use only.
PACKAGING & COLORS
Kit sizes available are 1, 3, 15 gallons
ADVANTAGES
- Cost effective
- Low viscosity promotes excellent adhesion to concrete substrates
- Easy 2 to 1 mix ratio (by volume)
- Low odor during application & cure, can be applied in occupied facilities
- VOC compliant with ALL U.S. regulations
- Can be factory or field pigmented using Thermal- Chem’s Universal Pigment
USES / APPLICATIONS
- Used as a primer on older concrete substrate
- Used as a primer under Thin-Mil systems.
- Used as the base coat for DecoFlake, DecoQuartz & DecoEssence
DATA SHEET
LIMITATIONS
- Must be applied in temperatures between 55 Degrees-F and 85 Degrees-F
- Do not thin this product
APPLICATION INFO
Apply #726 ArmorPrime with a squeegee, brush, or high quality non-shed roller. Only mix the amount of product that can be properly applied within 20-40 minutes.
Apply #726 ArmorPrime only to clean and sound substrates. Mechanical preparation by means of shot-blasting or diamond grinding to an ICRI CSP 2/3 is recommended (see ICRI Guideline No. 03732 for additional details).
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.