CLEAR EPOXY TOPCOATS
#707 DECOTOP PLUS
Slightly Faster Clear Epoxy – 100% Solids with Good UV Resistance
Deco Top Clear is a two (2) component 100% solids water- clear epoxy that is specifically formulated to be a high- performance, U.V. resistant, extremely durable, high gloss protective coating.
Deco Top Clear is expressly recommended for interior applications.
Our proprietary ultraviolet additive makes Deco Top Clear a great choice for decorative flooring systems being exposed to moderate levels of UV sources such as garages, basements, offices with a high concentration of windows, and industrial applications.
PACKAGING & COLORS
Kit sizes are available are 1, 3, 15 gallons
ADVANTAGES
- Excellent UV light resistance
- Water-clear formulation
- Excellent resistance to chipping/dings due to its elongation properties
- Faster cure and quicker return to service
- Easy 2 to 1 mix ratio
- 100% solids-no odor formulation
- Unmatched gloss retention
- Excellent wear durability
USES / APPLICATIONS
- Interior Applications
-
A 100% solids epoxy with exceptional UV stability
-
Our fastest curing epoxy topcoat
DATA SHEET
LIMITATIONS
- Do not apply to a substrate below 45° F
- Limit exposure to harsh chemicals
- Avoid allowing “puddling” during application
APPLICATION INFO
Surface Preparation: New concrete must have a 28-day cure and be applied to a clean/sound substrate that is free of laitance and curing compounds. Mechanical preparation by means of shot-blasting or diamond grinding to a minimum of a CSP 2/3 as defined by ICRI, then properly vacuumed to remove any remaining dust.
Mixing: Pre-mix both components separately for approximately 1-2 minutes. Combine both components and mix an additional 3 minutes at a low to medium rpm.
Applying Product: Pour product into “ribbons”, then spread with a high-quality squeegee. Backroll the material in the opposite direction of how it was squeegeed onto the surface. DO NOT TURN THE MIXING VESSEL (BUCKET) OVER ON THE FLOOR IN AN EFFORT TO UTILIZE THE ENTIRE CONTENTS.
Typical Coverage will be between 80-160 square feet per gallon. This will vary depending on the surface to which the mixed product is applied.
GET A FREE QUOTE
The experts at Thermal-Chem can provide you with expert advice and free quotes for your specific project. Call or email now.